[. . . ] ­ Please check on a regular basis both seatbelts and the adjustable feet for wear and damage of all kind. ­ Currently this product is not suitable to be mounted onto a stand. ­ Please dispose of all plastic packaging materials immediately, as they could be fatal for children. [. . . ] The carrying handles can be held together by using the sewn in designated handle tie. Press the lever, which is positioned at the front side of the adjustable hinge mechanism. Now remove the canopy by sliding it away (backwards) from the carry cot. To install the canopy, slide the adjustable hinge mechanism over the guide rail, which is positioned at the underside of the carry cot frame. Take off the seating unit of the CYBEX Callisto Buggy (instructions on how to do this can be found in the instruction manual of the buggy). Now insert both supplied adapters (one on each side) from the front onto the frame and slide along until they engage. Please ensure that they are locked in the defined position by the lock pin and the respective holes on the frame. From the front, guide the carry cot onto the frame of the buggy and place the pins attached on left/right side of the carry cot onto the rear support on the frame. Push from the inside of the carry cot onto both adaptors to ensure that they have engaged correctly. Finally connect the elastic straps with the press buttons on the rear leg (left / rigth side) (Picture 5) WARNING: PLEASE ENSURE THAT ALL LOCKING DEVICES ARE ENGAGED BEFORE USE USE WITH CYBEX ATON / CYBEX CARRY COT The supplied adapters can be used on both the carry cot and the CYBEX Aton. for further information please refer to the manual of the CYBEX Aton car seat. To take off the adapter lift up the rear part of the adapter and pull off to the front. To take off the carry cot release the two elastic straps from the rear tubes and press the buttons on the adapter (on both sides of the buggy). CLEANING: ­ After removing the metal bracing strips, the mattress and the wooden base the carry cot can be washed at 30 ° using the sensitive care/gentle cycle. However, in case of heavy rain water can penetrate through the seams resulting in water stains. DISPOSAL: At the end of the product life of your carry cot, a proper disposal is important. [. . . ] In a warranty case the product has to be returned in a clean and complete condition. prior to contacting the retailer , please read this instruction manual carefully. This warranty does not cover any damages caused by misuse, environmental influence (water, fire, road accidents etc. [. . . ]